Filter
Top Products
Listening to the XM
1
2
3
4
5
You can use this unit to control a XM satellite di-
gital tuner (GEX-P910XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuners operation manual.
! This unit does not have the text scroll
function.
! With this unit, you can operate one addi-
tional function: XM channel direct
selection.
1 XM band indicator
Shows the XM band which has been
selected.
2 XM channel select setting indicator
Shows what channel select setting has
been selected. CH is displayed when
Channel number is selected, and CAT is
displayed when Category is selected.
3 XM preset number indicator
Shows what XM preset has been selected.
4 XM channel number indicator
Shows to which XM channel number the
tuner is tuned.
5 XM channel name
Shows the channel name of broadcast
channel.
1 Press SOURCE to select the XM.
Press SOURCE until you see XM displayed.
2 Press BAND to select a XM band.
Press BAND repeatedly until the desired XM
band is displayed, XM-1, XM-2 or XM-3.
3 To perform tuning, push Multi-Control
left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you push and hold Multi-Control left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting the channel
in the channel category on page 47.)
XM tuner
En
45
English
Section
10