Filter
Top Products
Black plate (9,1)
A. CONN(connecting to aBluetooth device auto-
matically)
1 Press M.C. toturn automatic connectionon or
off.
VISIBLE (settingthe visibility of thisunit)
To checkthe availability ofthis unit from otherde-
vices, Bluetoothvisibility of this unitcan be turned
on.
1 Press M.C. toturn the visibilityof this unit on
or off.
! While settingSPCL. DEV.,Bluetooth visibil-
ity ofthis unit is turnedon temporarily.
PIN CODE(PIN code input)
To connectyour cellular phoneto this unitvia
Bluetooth wirelesstechnology, youneed to entera
PIN codeon your phoneto verify the connection.
The defaultcode is 0000,but you can changeit
with thisfunction.
1 Press M.C. todisplay the settingmode.
2 Press a orb to selecta number.
3 Press d tomove the cursorto the nextposi-
tion.
4 After inputting PINcode, pressand hold M.C.
The PINcode can bestored in the memory.
! After inputting 8digits PIN code,press d
to storein memory.
! After inputting, pressingM.C. returns you
to thePIN code inputdisplay, andyou can
change thePIN code.
DEV.INFO (BD (Bluetoothdevice) address dis-
play)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. left toswitch to the BDaddress.
Turning M.C.right returns to thedevice name.
Phone menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
1 Press
to display the phone menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
MISSED (missedcall history)
DIALED (dialedcall history)
RECENT (receivedcall history)
1 Press M.C. todisplay the phonenumber list.
2 TurnM.C. to selecta name orphone number.
3 Press M.C. tomake a call.
4 When you find aphone number thatyou want
to storein memory, pressand hold oneof the
preset tuningbuttons (1 to 6).
! Pressone of presetbuttons 1 to 6to recall
the desiredpreset number.
PHONE BOOK(phone book)
! The phonebook in your cellularphone will be
transferred automaticallywhen the phoneis
connected tothis unit.
! Depending onthe cellular phone,the phone
book maynot be transferredautomatically. In
this case,operate your cellularphone to trans-
fer thephone book. Thevisibility of this unit
should beon. Refer toVISIBLE (setting thevisi-
bility ofthis unit) on thispage.
1 Press M.C. todisplay SEARCH (alphabetical
list).
2 TurnM.C. to selectthe first letterof the name
you arelooking for.
! Pressand hold M.C.to select the desired
character type.
3 Press M.C. todisplay a registeredname list.
4 TurnM.C. to selectthe name youare looking
for.
5 Press M.C. todisplay the phonenumber list.
6 TurnM.C. to selecta phone number you want
to call.
! When youfind a phone numberthat you
want tostore in memory,press and hold
one of thepreset tuning buttons(1 to 6).
! Pressone of presetbuttons 1 to 6to recall
the desiredpreset number.
7 Press M.C. tomake a call.
PRESET (presetphone numbers)
1 Press M.C. todisplay the settingmode.
2 Use M.C. to selectthe desired presetnumber.
Turn tochange the menuoption. Pressto se-
lect.
! You can alsopress one of thepreset num-
ber buttons1 to 6to select a number.
3 Press M.C. tomake a call.
PHONE FUNC(phone function)
You can setA. ANSR andR.TONE from thismenu.
Fordetails, refer toFunction andoperation on this
page.
Function and operation
1 Display PHONE FUNC.
Refer to PHONE FUNC (phonefunction) on this
page.
2 Press M.C. to display the functionmenu.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
A. ANSR(automatic answering)
1 Press M.C. toturn automatic answeringon or
off.
R.TONE (ringtone select)
1 Press M.C. toturn the ringtone on oroff.
Audio Adjustments
1 Press M.C. to display the mainmenu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balanceadjustment)
1 Press M.C. todisplay the settingmode.
2 Press M.C. tocycle between fader(front/rear)
and balance(left/right).
3 TurnM.C. to adjustspeaker balance.
! When therear output andRCA output setting
are SW,you cannot adjustfront/rear speaker
balance. Referto SW CONTROL(rear output
and subwoofersetting) on the nextpage.
EQUALIZER (equalizerrecall)
English
Operating this unit
02
9
Section
Operating this unit
En
<YRD5324-A/S>9