Filter
Top Products
IMPORTANT 2
FOR USE IN THE UNITED
KINGDOM
The wires in this mains lead are coloured in
accordance with the following code:
blue neutral
brown live
If the plug provided is unsuitable for your socket
outlets, the plug must be cut off and a suitable plug
fitted.
The cut-off plug should be disposed of and must not
be inserted into any 13 amp socket as this can result
in electric shock. The plug or adaptor or the distribu
tion panel should be provided with 5 amp fuse. As the
colours of the wires in the mains lead of this ap-
pliance may not correspond with coloured markings
identifying the terminals in your plug, proceed as fol-
lows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which iscoloumd brown must be connected
to the terminal which is marked with the letter L or
coloumd red.
Do not connect either wire to the earth terminal of a
three pin plug.
NOTE
After replacing or changing • fuse,the fuse cover in the
plug mus_ be replaced with a fuse cover whic_
corresponds to the colour of the insert in the base of
the plug or the word that is embossed on the base of
the plug, end the applia rice must not be used without e
fuse cover. If lost, replacement fuse covers can be
obtained from your dealer.
Only 5 A fuses approved by B.S.I. or A.S.T.A. to B.S.
1362 should be used.
SAFETY INSTRUCTIONS
READ INSTRUCTIONS - All the safety and operating
instructions should be read before the appliance is
operated.
RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained for future
reference.
HEED WARNING -- All warnings on the appliance end in
the operating instructions should be adhered to.
FOII__OW INSTRUCTIONS - All operating and use
instructions should be followed.
WATER AND MOISTURE - The appliance should not
be used near water for example, near e bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near s swimming pool, etc.
LOCATION - The appliance should be installed in a
stable location.
WALL OR CEIMNG MOUNTING - The appliance
should not be mounted to a wall or ceiling.
VENTILATION - The appliance should be situated so
that its location or position does not interfere with
its proper ventilation. For example, tt.e appliance
should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or.
placed in • built-in installation, such as s bookcase
or cabinet that may impede the flow of air through
the ventilation openings.
HEAT - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
POWER SOURCES - The appliance should be
connected to • power supply only of the type
described in the operating instructions or as
marked on the appliance.
IqDWlER-CORD PROTECTION - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the appliance.
POLARIZATION - If your purchased product is
provided with a polarized power plug, please read
the following instructions. This product is equipped
with s polarized alternating current line plug (a plug
having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Oo not defeat the
safety purpose of the polarized plug.
CLEANING - The appliance should be cleaned only
with a polishing cloth or a soft dw cloth. Never
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
cabinet.
POWER ONES - An outdoor antenna should be located
away from power lines.
NONUSE PERIODS - The power cord of the appliance
should be unplugged from the outlet when left
unused for a long period of time.
OBJECT AND MQUID ENTRY - Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings.
DAMAGE REQUIRING SERVICE - The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
• The power-supply cord or the plug has been
damaged.
• Objects have fallen, or liquid has been spilled into
the appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally
or exhibits a marked change in performance.
• The appliance has been dropped or the enclosure
damaged.
SERVICING - The user should not attempt to service
the appliance beyond that described in the
operating instructions. All other servicing should
be referred to qualified service personnel.
OUTDOOR ANTENNA GROUNDING - If an outside
antenna is connected to the antenna terminal, be
sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges.
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See Fig.
A.
CART - An appliance end cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
NEC -- NATIONAL ELECTRIC CODE
ANTENNA
LEAD IN
J WIRE
GROUND
ANTENNA
I DISCHARGE UNIT
(NEC SECTION 810 -- 20)
ELECTRIC I
SERVICE I GROUNDING CONDUCTORS
(NEC SECTION 810 -- 21)
CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
FIG. A (NEC ART 250, PART H)
2
<RRB1143>
En