Filter
Top Products
11
BEFORE OPERATING (PANEL FACILITIES)
PANEL FACILITIES
1. POWER switch (—OFF/ _ON)
This switch is located on the rear panel of the unit. Switches
the unit’s power ON/OFF.
2. Display (☞P.13)
3. Folder BACK button
Returns to the next higher level in the folder hierarchy when
using a CD-ROM or USB memory with a hierarchical folder
structure (☞P.16).
4. EJECT button
Ejects the disc. (☞P.14)
5. CUE/LOOP button
7 CUE/LOOP MEMORY/DELETE button
Use to record cue points and loop points. (☞P.20)
7 CUE/LOOP CALL buttons (2, 3)
Use to call cue points and loop points recorded. (☞P.20)
6. Rotary dial (SELECT PUSH 4, ¢)
Use to select tracks in forward or reverse direction (track ad-
vance) and to select folders. (☞P.16)
Press to confirm folder/track selections.
7. HOLD button
Preserves the effect of the Digital Jog Break and Scratch Jog
Effect. (☞P.17)
8. JOG MODE VINYL button
VINYL mode: The button indicator lights. When the surface of
the jog dial is pressed during playback, play stops, and if the
jog dial is then rotated, sound is produced in accordance with
the degree of rotation.
CDJ mode: The above action does not occur when the jog dial
is pressed.
¶ The currently set jog mode is stored in memory even when
power is turned off.
POWER
SOURCE SELECT
DIRECTION JOG MODE
TRACK SEARCH
SEARCH
PLAY/PAUSE
REV FWD
0
REV LOOP VINYL
CUE
USB
CD
SELECT PUSH
MEMORY
DELETE
EJECT
CALL
CUE/LOOP
CDJ
-
400
OFF
TIME
MODE
MEMORY PC
AUTO
CUE
TEXT
MODE
UTILITY
MODE
SCRATCH
JOG EFFECT
BUBBLE TRANS
BACK
HOLD
TEMPO
±6 ±10 ±16 WIDE
MASTER TEMPO
TEMPO
JET ROLL WAH
WAH
DIGITAL
JOG BREAK
REALTIME CUE
IN OUT RELOOP/EXIT BEAT LOOP
LOOP DIVIDEOUT ADJUSTHOT LOOP
ON
MULTI PLAYER
1 3 4
5
6
1213151630
19
20
23
21
22
24
25
2
14
28
29
23
26
27
8
9
10
11
7
17
18
9. TEMPO control range button (±6/±10/±16/WIDE)
Changes the variable range of the tempo control. (☞P.17)
¶ The tempo range will be saved in memory when the power
is turned off.
10. MASTER TEMPO button/indicator
Turns the Master Tempo function ON/OFF (lights when turned
ON). (☞P.17)
11. TEMPO control slider
Controls the track’s tempo (playback speed). (☞P.17)
12. Jog dial (–REV/+FWD) (☞P.16)
A photograph or other graphic of your choice can be inserted
(☞P.13)
13. Jog indicator
¶ Indicator lights when disc is inserted during normal mode,
or if USB memory is selected during normal mode.
¶ The illumination pattern of the jog indicator can be
changed.
7 Changing the jog indicator’s illumination pattern.
1. Hold the TEXT MODE/UTILITY MODE button depressed for
one second or more to enter utility setting mode.
Turn the rotary dial so that the display screen shows [JOG
ILLUMI], and then press to confirm the selection.
The display screen will show [PATTERN 1].
2. Turn the rotary dial to change the illumination pattern.
Patterns can be chosen from PATTERN 1 to PATTERN 6.
3. Press the rotary dial to confirm.
Utility setting mode will be canceled if no command is en-
tered for 15 seconds. Pressing the BACK button will also
exit the setting mode.
14. Disc loading slot
Located in front panel. (☞P.14)
15. Disc indicator
¶ When no disc is inserted, the indicator is turned off.
¶ When disc loading is completed, indicator turns on.
16. Forced ejection hole
Located in front panel of the unit. (☞P.14)
17. PLAY/PAUSE button (6)
(☞P.15)
18. PLAY/PAUSE indicator (6)
Lights when playing, and flashes when in pause mode.
19. CUE button
Use to set and confirm cue point. (☞P.18)
20. CUE indicator
Lights when cue point is set, and flashes when in pause mode.
21. SEARCH buttons (1, ¡)
Use to perform fast-forward and fast-reverse (with sound)
during playback mode. (☞P.16)
22. TRACK SEARCH buttons (4, ¢)
Changes tracks in the forward/reverse direction. (☞P.16)
23. Reverse button (DIRECTION REV) (☞P. 19)
When this button is pressed, its indicator lights and the unit is
set to reverse play.