Philips MX3900D Stereo System User Manual


 
23
English
3139 115 21993
Turning on/off auto Eco standby mode
This is a power-saving feature, the system will
automatically switch to Eco standby mode if you
do not press any buttons within 30 minutes
after a disc has stopped playing.
AUTO ECO ON
1
2
STANDBY-ON
13:38
STOP
1 Press and hold STANDBY ON to switch the
system to standby mode.
The clock appears.
2 Press and hold Ç until “AUTO ECO ON
appears.
To turn off the setting, repeat step 2 until
AUTO ECO OFF” appears.
Using the Disc Menu
Depending on the disc, a menu may appear on
the TV screen once you load in the disc.
To select a playback feature or item
Use the joystick (1 2 3 4) or numeric
keypad (0-9) on the remote, then press ÉÅ
or OK to start playback.
To access or remove the menu
Press DISC MENU on the remote.
For VCD with Playback Control (PBC)
feature (version 2.0 only)
In stop mode, press DISC MENU to toggle
between ‘PBC ON’ and ‘PBC OFF’, then the
playback will start automatically.
If you select ‘PBC ON’, the disc menu (if
available) will appear on the TV. Use the Joystick
(1 2 34) to highlight your selection and press
OK to confirm or use the numeric keypad (0-9)
to select a play option.
During playback, pressing DISC MENU will
return to the menu screen (if PBC is on).
Basic playback controls
Pausing playback
Press ÉÅ.
To resume normal playback, press ÉÅ
again.
Selecting another track/chapter
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter number.
Searching backward/forward
Press and hold S / T, then press ÉÅ to
resume normal playback.
While searching, pressing and holding
S / T again will increase the search
speed.
Selecting next disc
Press DISC SKIP.
The selected disc will play once, then stop.
Stopping playback
Press Ç.
Resuming playback from the last
stopped point (DVD/VCD)
In stop mode and when the disc has not been
ejected, press ÉÅ.
To cancel the resume mode
In stop mode, press Ç again.
Notes:
Opening the current disc tray or selecting
another disc tray will cancel the resume feature.
Resume option may not be available on some
discs.
Replacing discs without interrupting
playback
Press OPEN•CLOSE 0 buttons of the
inactive disc trays.
For example, if currently disc tray 1 is playing,
you can replace the discs on disc trays 2~5.
Disc Operations
buttons on
front panel
DVD system’s
display panel
pg 001-044_MX39-37-Eng1 2/25/03, 9:58 AM23