Philips MX3900D Stereo System User Manual


 
16
English
3139 115 21993
Functional Overview (illustrations on page 3)
Main unit and remote control
1 STANDBY ON
Switches to Eco Power standby mode or turns
on the system. (see page 39)
*Switches to standby mode. (see page 39)
2 Disc trays 1~5
3 OPEN•CLOSE 0 (DISC1~5)
Opens/Closes the individual disc tray.
4 iR SENSOR
Point the remote control towards this sensor.
5 Speaker display panel
6 System display panel
7 TUNING
Switches between frequency tuning and preset
tuning mode. (see pages 34-35)
8 PROG (PROGRAM)
DISC: starts programming. (see pages 22-23)
TUNER: starts *automatic/ manual preset
programming. (see page 35)
CLOCK: selects 12- or 24-hour clock display.
(see page 18)
9 ÉÅ PLAY•PAUSE
DISC: starts/pauses playback. (see page 23)
TUNER: *enters Plug & Play mode and/or starts
preset radio station installation (only on the
main unit.) (see page 34)
Ç STOP
Exits an operation.
DISC: stops playback or *clears a program.
(see page 23, 25)
TUNER: *erases a preset radio station.
(see page 35)
S SEARCH T (PREV/NEXT)
DISC: *searches backward/forward or selects a
track. (see page 23)
TUNER: tunes the radio frequency up/down or
selects a preset radio station. (see pages 34-35)
(On the remote, it can only tune the radio
frequency up/down.)
CLOCK: sets the minutes and hours.
(see pages 18, 36)
0 SEATING (only available in Multi-channel
mode)
Turns on/off the seating control diagram on the
TV. Use the VOLUME control on the main unit
or joystick on the remote to select the desired
seating position. (see page 20)
! SURROUND (SURR.)
Selects multichannel surround, 3D sound or
stereo mode. (see page 38)
@ SOURCE
Selects the relevant active mode : TV/AV, DISC,
TUNER or AUX/DI.
DISC: toggles between DISC 1~5.
TUNER: toggles between FM and AM band.
AUX/DI: toggles between AUX and DIG IN
(Digital Input) mode.
# CLOCK•TIMER
*Enters clock or timer setting mode.
(see pages 18, 36)
Shows clock display for a few seconds.
(see page 18)
$ VOLUME (VOL +-)
Adjusts the volume level.
% BASS / TREBLE
Selects bass or treble sound. Use the VOLUME
control to select the desired enhancement level.
(see page 38)
^ n
Plugging in the headphones jack. The speakers
output will be cancelled.
* = Press and hold the button for more than two seconds.
pg 001-044_MX39-37-Eng1 2/25/03, 10:28 AM16