Philips ORT2300 Radio User Manual


 
13EN
Note
If you store a radio station with the sequence number
of another one, the earlier one is overwritten.
Display DAB information
The name of current DAB station is displayed.
You can also view the other information.
To cycle through available information, press
repeatedly.
Dynamic label segment (DLS)
Signal strength
Program type (PTY)
Ensemble name
Frequency
Signal error rate
Bitrate codec
Use DAB menus
1
Press and hold to access the
DAB menus.
2 Press / repeatedly to toggle through
the menus.
Re-scan for stations
Full scan is used to perform a wide range
search for DAB radio stations.
Press to start scanning for available
DAB stations.
» After the scanning is complete, the rst
stored station is broadcast.
Tune to a station manually
With this feature, you can tune to a specic
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained with
this feature.
1 Press to access the station list.
2 Press / repeatedly to select a station
from 5A to 13F.
3 Press to conrm the option.
DRC (Dynamic Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1 Press to access the sub-menus.
2 Press / repeatedly to select an
option. (The asterisk behind the option
indicates the current setting.)
[DRC off]: No compensation applied.
[DRC low]: Medium compensation
applied.
[DRC high]: Maximum compensation
applied.
3 Press to conrm the option.