Filter
Top Products
9EN
5 Use the alarm
timer
Note
•
Make sure that you have set the clock correctly.
Set an alarm
You can set two alarms.
1 Press and hold AL1 (or AL2) for two
seconds.
» [Alarm 1] (or [Alarm 2]) is displayed
with AL1 (or AL2) blinking.
» The current alarm time is displayed
with hour digits blinking.
2 Press / to set the hour, and then
press
to conrm.
» The minute digits begin to blink.
3 Press / to set the minute, and then
press
to conrm.
» The alarm source name begins to
blinks: [DAB], [FM], or [Buzzer].
4 Press / to select an alarm source,
and then press
to conrm.
• If [DAB] or [Buzzer] is selected as
the alarm source, press
to
select a preset radio station or the last
listened station.
» The alarm frequency blinks: [Daily]
(daily), [Weekdays] (weekdays),
[Weekends] (weekends), or
[Once](once).
5 Press / to select a frequency, and
then press
to conrm.
» The alarm volume level blinks.
6 Press / to select the volume level,
and then press
to conrm.
» [Alarm Saved] ashes.
Deactivate a preset alarm
1
Press AL1 (or AL2) to view alarm settings.
2 Press AL1 (or AL2) again.
» [Alarm 1] (or [Alarm 2]) and [On] is
displayed.
3 Press AL1 (or AL2) repeatedly to select
[On]or [Off].
• [On]: The preset alarm is activated.
• [Off]: The preset alarm is deactivated.
» AL1 (or AL2) is displayed when the
preset alarm is activated.
» AL1 (or AL2) disappears when the
preset alarm is deactivated.
Snooze the alarm
When an alarm sounds, press SNOOZE.
» The alarm repeats after 9 minutes.
Stop the alarm
When the rst (or second) alarm sounds, press
AL1 (or AL2).
» The alarm stops and then repeats at
the set time.