Philips ORT2300 Radio User Manual


 
10 EN
6 Listen to FM
radio stations
Note
For optimal reception, fully extend the antenna and
adjust its position.
You can store a maximum of 20 FM radio stations.
Switch to FM mode
Press SOURCE repeatedly until [FM Mode] is
displayed.
» FM is highlighted.
» The current frequency is displayed.
Search for a radio station
automatically
Press and hold / until [Scanning...] is
displayed.
» After a strong radio station is detected,
the search stops and the radio station
is broadcast.
Search for a radio station
manually
Press / repeatedly until the frequency of
target radio station is displayed.
Store radio stations
automatically
Press and hold until [Auto] is
displayed.
» After the search is complete, the rst
stored radio station is broadcast.
To tune to a stored radio station, press
PRESET to access the list of stored radio
stations, and then press
/ repeatedly.
Program radio stations
manually
1
Tune to a radio station.
2 Press and hold PRESET until [Preset
store] is displayed.
3 Press / repeatedly to select a preset
sequence number.
4 Press PRESET to conrm.
» The radio station is stored with the
selected sequence number.
5 Repeat steps 1-4 to program more radio
stations.
To tune to a stored radio station, press
PRESET to access the list of stored radio
stations, and then press
/ repeatedly.
Note
If you store a radio station with the sequence number
of another one, the earlier one is overwritten.