Philips ORT2300 Radio User Manual


 
12 EN
7 Listen to DAB
radio stations
Note
For optimal reception, fully extend the antenna and
adjust its position.
You can program a maximum of 20 DAB radio stations.
Check with local retailer or go to www.WorldDAB.org
for applicable DAB radio frequencies in your area.
Switch to DAB mode
Press SOURCE repeatedly until [DAB Mode]
is displayed.
» DAB is highlighted.
For the rst time use
1
Press SOURCE repeatedly to switch the
product to DAB mode.
2 Press / repeatedly until the [Full
scan] menu is displayed.
3 Press to activate the automatic
search.
» This product automatically stores radio
stations with sufcient signal strength.
» After the search is complete, the
rst stored radio station is broadcast
automatically.
4 Press / to select a station, and then
press the
knob to start listening.
Tip
You can re-scan to update the list of stored stations
(see 'Re-scan for stations' on page 13).
You can tune to a station manually (see 'Tune to a
station manually' on page 13).
About special symbols
Some symbol may be displayed before the
name of a station.
H: The station is one of your 10 favorite
stations.
?: The station is unavailable or inactive.
: The station is a primary station with
secondary service.
: The station is a secondary station.
Tune to a stored radio station
1
Press / repeatedly to select a station.
2 Press PRESET to start listening.
Program radio stations
1
Tune to a DAB radio station.
2 Press and hold PRESET to activate the
programming.
3 Press / repeatedly to select a preset
sequence number.
4 Press PRESET to conrm.
» The radio station is stored with the
selected sequence number.
5 Repeat steps 1-4 to program more radio
stations.
To tune to a stored radio station, press
PRESET to access the list of stored radio
stations, and then press
/ repeatedly.