Filter
Top Products
41
English
Tuner Operations
1 Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
“FM TUNER” or “MW TUNER”.
2 Press 1 2 or use the numeric keypad (0-9)
to select a preset number to begin.
● If you use S / T on the front panel for
preset tuning, make sure the system is in
preset tuning mode. If not, press TUNING.
➜ "PRESET MODE" appears.
3 Press and hold PROGRAM (or PROG on
the front panel) until "AUTO PROGRAM"
appears.
➜ If a radio station is stored in one of the
presets, the same radio station will not store
under another preset number.
➜ If no preset number is selected, automatic
preset will begin from preset (1) and all your
former presets will be overridden.
Manual presetting
You can choose to store only your favourite
radio stations.
1 In tuner mode, press PROGRAM (or PROG
on the front panel).
2 Press 1 2 or use the numeric keypad (0-9)
to select a preset number.
3 Press S / T on the remote to select a
radio station.
4 Press PROGRAM again to store.
Selecting a preset radio station
● Press 1 2 or use the numeric keypad (0-9)
to select a preset number.
➜ The preset number, radio frequency, and
waveband will appear.
Deleting a preset radio station
● Press and hold Ç until “PRESET
DELETED” appears.
➜ The current preset radio station will be
deleted and the next available preset radio
station will take its place.
➜ All other preset radio stations with higher
numbers will decrease by one.
Changing tuning grid (not available
for all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all
previously stored preset radio
stations.
STANDBY-ON
iR SENSOR
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
5 DISC CHANGER
OPEN•CLOSE
1 Disconnect the system from the AC power
supply (pull out the AC power cord).
2 While holding down STANDBY ON and
OPEN•CLOSE 0 DISC5 on the main unit,
reconnect the system to the AC power supply.
➜ The display will show "GRID 9" or
"GRID 10".
Notes:
– GRID 9 and GRID 10 indicate that the tuning
grid is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.