Filter
Top Products
34
English
DVD Menu Options
Setting the analogue output
Set Analogue Output to match your DVD
home cinema system’s playback capability.
This function can also be accessed via the
SURR. button on the remote control (or
SURROUND on the front panel).
Follow the steps of “Using the Setup Menu”
and select :
> Analog output
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
Stereo
3D sound
Multi-channel
1en
1en
st1
Speaker layout
PCM output
Stereo
Select this to change channel output to stereo
which delivers sound from only the two front
speakers and subwoofer.
3D Sound
Select this to change channel output to 3D
sound which delivers surround sound from
only the two front speakers and subwoofer.
Multi-channel
Select this to enable Multi-channel output.
Night mode – turning on/off
Follow the steps of “Using the Setup Menu”
and select :
> Night mode
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
On
Off
1en
1en
st1
Speaker layout
PCM output
Off
Select this when you want to enjoy the
surround sound with its full dynamic range.
On
Select this to level out the volume. High
volume outputs will be softened and low
volume outputs are brought upward to an
audible level. This feature is only available for
movies with Dolby Digital mode.