Filter
Top Products
25
English
4 Press S / T or use the numeric
keypad (0-9) to enter the track number.
5 Press OK to store the track.
6 Repeat steps 4~5 to select other tracks.
7 Press ÉÅ to start programme playback.
➜ Only the tracks programmed from audio
CDs will play.
8 Press Ç to stop playback or exit programme
mode.
Note:
– If you do not press any buttons within 20
seconds, the system will exit programming mode.
Clearing the programme
● Stop playback, then press Ç again.
➜ PROG disappears from the display panel and
"PROGRAM CLEARED" appears.
Disc Operations