Philips MCD107/98 Home Theater System User Manual


 
18
Program radio stations
manually
Note
You can program a maximum of 20 preset
radio stations.
1 Tune to a radio station.
2 Press PROG/ANGLE to activate program
mode.
[PROG] blinks on the display.»
3 Press / to allocate a number (1 to 20)
to this radio station, then press PROG/
ANGLEWRFRQÀUP
The preset number and the frequency »
of the preset station are displayed.
4 Repeat the steps above to program other
stations.
Note
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
Press / to select a preset number.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
6 Listen to radio
Tune to a radio station
1
Press TUNER repeatedly to select FM.
2 Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed.»
The radio tunes to a station with »
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press 
/ UHSHDWHGO\XQWLO\RXÀQGRSWLPDO
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset
radio stations.
1 In the tuner mode, press and hold PROG/
ANGLE for more than 2 seconds to
activate automatic program mode.
[AUTO] (auto) is displayed.»
All available stations are programmed »
in the order of waveband reception
strength.
7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV»
broadcast automatically.
EN