Filter
Top Products
16
English
Radio Reception
Tuning to radio stations
1 Press POWER to on, then press TUNER to
select TUNER mode.
➜ Display: the waveband, radio station
frequency and if programmed, a preset number
are shown.
2 Press TUNER once or more to select your
waveband: FM or AM (MW).
3 Press and hold 4 or ¢ until the frequency
in the display starts running.
➜ The radio automatically tunes to a station of
sufficient reception.
➜ If a FM station is received in stereo,
STEREO is shown.
4 Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press 4 or ¢
briefly and repeatedly until optimal reception is
found.
● To tune to a weak FM station, press FM MODE
on the system once or more until the MONO
appears on the display.
Storing preset radio stations
You can store up to 32 preset radio stations in
the memory (20 FM and 12AM).
1 Tune to your desired radio station (see “Tuning
to radio stations”).
2 Press PROGRAM to activate programming.
➜ Display shows: current radio frequency and
CH. -- flashes for you to enter a preset number.
3 Press PRESET/REPEAT to select a preset
number.
4 Press PROGRAM to confirm.
5 Repeat steps 1-4 to store other stations.
Helpful hints:
–You can erase a preset station by storing
another frequency in its place.
To listen to a preset station
● Either press PRESET/REPEAT once or more
until the desired preset station is displayed.
● Or press digits 0 - +10 on remote control to
select the desired preset station. e.g.
Preset 3: Press 3
Preset 10: Press +10 and then, 0
Preset 13: Press +10 and then, 3
Preset 20: Press +10, +10 and then, 0.