Filter
Top Products
13
English
Switching on/to standby and
selecting functions
1
Press POWER to switch on.
➜ The display lights up blue.
➜ The system switches to the last source
selected.
2 To select your function, press TUNER.
CD /ÉÅ or TAP E.
3 Press POWER to switch the system to standby.
➜ The clock is displayed.
IMPORTANT!
– Adjust the volume to a moderate level
before you switch the system to standby
mode.
Helpful hints:
– In the standby mode, the tone, sound settings,
tuner presets, and the volume level will be
retained in the system’s memory.
Volume control
1 Check the system is switched on.
2 Adjust the volume with VOLUME rotary (on
the remote control, press VOL 5/∞).
➜ Display shows VOL and a number from 00 -
40.
IMPORTANT!
– Adjust the volume to a moderate level
before you switch the system to standby
mode or plug in the headphones.
MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1 On the remote control, press MUTE to
switch off the sound.
➜ Display shows .
Playback continues without sound.
2 To switch on the sound, press MUTE again or
adjust the volume with VOLUME rotary (on
the remote control, press VOL 5/∞).
Sound control
DSC (Digital Sound Control)
Digital Sound Control enables you to select
predefined sound settings.
● Press DSC repeatedly to select your desired
sound setting:.
➜ FLAT, ROCK, JAZZ, POP or CLASSIC is
displayed.
HYPER BASS SOUND (HBS)
● Press HYPER BASS SOUND once or more
to turn bass enhancement on or off (on the
remote control, press HBS)
➜ HBS appears when HYPER BASS
SOUND is activated.
Helpful hints:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off HYPER BASS
SOUND or reduce the volume.
Basic Functions
MUTE
RANDOM
FM MONO/
STEREO
HBS
DSC
PROGRAM
PRESET/
REPEAT
VOL
MUTE
RANDOM
FM MONO/
STEREO
HBS
DSC
PROGRAM
PRESET/
REPEAT
VOL