Filter
Top Products
9
English
Connections
Step 1: Placing speakers and
subwoofer
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
–To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD Mini
Hi-Fi System.
Step 2: Connecting speakers
and subwoofer
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to “R” and
left speaker to “L”, coloured (marked) wire to
“+” and black (unmarked) wire to “–”. Fully
insert the stripped portion of the speaker wire
into the terminal as shown.
Connect the subwoofer using subwoofer cable
to the SUBWOOFER OUT jack on the DVD
Mini Hi-Fi System to active input jack.
Notes:
–For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Use an active subwoofer only.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Front Left (L)
Front Right ( R )
IMPORTANT!
The type plate is located on the rear of
the system.
To avoid overheating of the system, a
safety circuit has been built in. Therefore,
your system may switch to Standby
mode automatically under extreme
conditions. If this happens, let the system
cool down before reusing it.
subwoofer
TV
Speaker
(right)
Speaker
(left)
Active
subwoofer
AC
IN
✤
FWD185 final IFU ( v1.1) 1/1/32, 3:23 AM9