Filter
Top Products
27
English
DVD Menu Operations
Setting the screen saver
If set to On, the screen saver will be activated
when you leave the system in stop or pause
mode for 5 minutes. The default setting is On.
Night mode - turning on/off
Off
Select this when you want to enjoy the surround
sound with its full dynamic range.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level. This
feature is only available for movies with Dolby
Digital mode.
Changing the password
You can change the six-digit code used as
Password.
1 In disc stop mode, press SETUP key on the
remote control.
2 Press 1 / 2/ 5 / 4 on the remote control to
navigate in the menu.
➜ Move to ”Preference Page” and press 4.
➜ Move to “Password” and press 2.
➜ Press OK.
The TV screen will display below picture
3 Use the numeric keys (0-9) to enter your six-
digit code.
➜ The password supplied by default is 136900.
● Go to “Password” and enter your new code.
Then, enter the same code again to confirm.
4 Press SETUP again to remove the menu.
FWD185 final IFU ( v1.1) 1/1/32, 3:24 AM27