Filter
Top Products
30
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 0,5 m from the screen.
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible connection is via the aerial cable.You
will therefore need to tune in your recorder’s test signal and store the test signal under a programme
number between 90 and 99, see Manual installation, p. 18.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also
the recorder handbook.
See Decoder, p. 21. You can also connect your decoder directly to
EXT1 with a eurocable.
RECORDER DECODER
4
1
2
3
EXT2
CABLE
Recorder (VCR-DVD+RW)
24571.1 en.qxd 31-08-2005 11:59 Pagina 30