C1641M-A (3/05) 11
REAR PANEL - FR8301 RECEIVER
Figure 5 illustrates the rear panel of the FR8301 receiver.
Figure 5.
Rear Panel of FR8301 Receiver
ᕡ
RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of
rack-mounted module
ᕢ
STANDALONE POWER CONNECTOR, 2-pin connector for power connection of
standalone module; removable mating connector with screw terminals (not shown)
ᕣ
FIBER OPTIC CONNECTOR, ST or FC (dependent on FR8301 model)
ᕤ
VIDEO OUT CONNECTOR, 75-ohm BNC analog video output
For additional information about rear-panel connections, refer to the
Installation
section.
ᕣ
ᕢ
ᕡ
ᕤ