Filter
Top Products
15
IMPORTANT - WHEN LOADING NEW PRESETS FROM
MEMORY STICK BE SURE TO MUTE ALL OUTPUTS
AND TURN YOUR POWER AMPLIFIERS DOWN OR OFF.
CORRUPT DATA CAN CAUSE UNDESIRABLY RESULTS
THAT COULD POTENTIALLY DAMAGE YOUR SPEAKERS.
SAVE PRESET
Allows saving the current configuration to one of 8 internal
memory positions or to an external USB memory stick. If external
USB is selected the VSX™ will automatically write a folder and
file to the stick without disturbing other files/folders that may be
present on the stick. It is not necessary to dedicate a memory
stick to the exclusive service of the VSX. Files from the stick may
be transferred to a PC or MAC computer.
Note: Configuration presets are stored in the folder: VSX48/presets on the memory stick.
NAME:
Selecting this function opens a alpha numeric keyboard. The VSX
allows 8 characters to name the file. The {Right Arrow} button on
the bottom right returns to the Save screen.
OK:
Must be selected and the data wheel pushed to actually save the
preset. You will be asked to confirm this on the next screen.
LOAD PRESET:
Rotate the data wheel to select from the eight internal presets and
from an external memory stick, if it is plugged in. Press OK and it
will load the preset to the current preset. A confirmation screen will
appear before overwriting the current preset.
INSTALLING SOFTWARE UPDATES:
Press and hold in the data wheel while powering up. Insert a
memory stick or connect via USB to a computer. The VSX will
search for files and will display a list. Select the desired version by highlighting it and press the Data
Wheel. A confirmation screen will appear. Cursor over to “yes” and press the Data Wheel. The VSX will
automatically perform the upgrade from here. When downloading the upgrade from the web place it in a
folder: VSX48/firmware. The upgrade file will be a .bin file.
Tools