Filter
Top Products
13
SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS
SStteerreeoo OOppeerraattiioonn
1. Set
AAMMPP MMOODDEE
switch to
SSTTEERREEOO
.
2. Set the A and B channel
AAMMPP FFUUNNCCTTIIOONN
switches and to
FFUULLLL RRAANNGGEE
.
3. Connect the Left and Right program signal to the A and B channel inputs: and .
4. Connect the A and B channel speaker outputs and to the loudspeaker full range inputs.
1
2 3
4 5
6 7
MMoonnoo BBrriiddggee MMooddee OOppeerraattiioonn
1. Set
AAMMPP MMOODDEE
switch to
BBRRIIDDGGEE
.
2. Connect the Mono program signal to the A channel input .
3. Connect the loudspeaker across the two RED banana posts on the amplifier outputs . The A channel is positive
and the B channel is negative.
Caution: The input level controls for both the A and B channels need to be set identically for
the amplifier to operate properly.
1
4
5
TTwwoo CChhaannnneell MMoonnoo——PPaarraalllleell MMooddee
(with single channel input)
1. Set
AAMMPP MMOODDEE
switch to
PPAARRAALLLLEELL
.
2. Connect the Mono program signal to the A channel input .
3. Connect the loudspeakers to both the A and B channel outputs: and .
1
4
6 7
2
4 5 6 78
1 3