Parasound P 7 Stereo Amplifier User Manual


 
19
MAKING ADJUSTMENTS IN THE SETUP MENU
Zhd Input Assign
Since the P 7 is a pure analog preamplifi er it does not offer any video switching. The P 7 does have
the ability to link to the Parasound Zhd 5 input HDMI selector (sold separately). This feature gives
you automatic switching of HDMI video sources as you select the audio sources on your P 7. In
the Zhd Input Assign setup, you can assign any of the Zhd’s 5 inputs to be selected simultaneously
with any of the P 7s 10 sources. Please note that this feature allows you to switch HDMI sources
but does not enable your P 7 to decode digital audio carried in the HDMI signal.
Press the Enter button to proceed into the Zhd Input Assignment.
In the Assignment page you will select the P 7 input and the Parasound Zhd HDMI input
association. For example you might want the HDMI input #3 to be selected when you select the
P 7’s
In 9/Multi 1
input. In this case you would want the Zhd Input Assign to look like this:
In 9/Multi 1: Zhd3
Press the VOL Up or VOL Down buttons to change HDMI input assignment in this order:
None
Zhd1
Zhd2
Zhd3
Zhd4
Zhd5
(back to None)
Press the Enter button to change the P 7 input you wish to
associate. Each press of the Enter button will step to the
next P 7 input.
After you fi nish, press the Exit Setup button to return to the
main Setup menu.
Repeat the above procedure for each P 7 input you wish to
associate with an HDMI input on the Zhd.
Note:
For more information on the Parasound Zhd HDMI selector,
Note: For more information on the Parasound Zhd HDMI selector, Note:
please contact your dealer or visit
www.parasound.com
.
Factory Reset
Caution!
This will
permanently delete all your settings
permanently delete all your settings
and custom input names and replaces
them with the factory default settings.
Press the Enter button to proceed into the Factory Reset conformation.
When “Factory Reset?” appears on the P 7 display, press the
Exit Setup button to exit the factory reset option and return to
the main Setup menu. Press the Volume Up button to
delete all
of your settings
of your settings
and restore the factory defaults.
Note:
If you press the Volume Up button to delete your settings
Note: If you press the Volume Up button to delete your settings Note:
you cannot recall them and you will have to repeat the entire
setup process.