Filter
Top Products
12
USING THE BYPASS MODE WITH A SURROUND RECEIVER
USING THE P 7 BYPASS MODE WITH A 2 CHANNEL AMP
By using a 2 channel power amplifi er and your surround receiver you can dramatically upgrade
the sound quality of your front L & R channels. Drive your Front L & R channels with the separate
2 channel power amplifi er while continuing to use your surround receiver to drive the Center and
Surround speakers. In this case you’ll connect the surround receiver’s Front L, R and Sub preamp
output jacks to the L, R & Sub jacks of the P 7’s Multichannel Inputs 9 or 10. The Main Outputs
from the P 7 will connect to your power amplifi er. Your Front L & R speakers will connect directly
to the new 2 channel power amplifi er instead of the L & R speaker terminals on your surround
receiver. Your Center and Surround speakers will remain connected directly to the speaker termi-
nals on your surround receiver. Connect your subwoofer to the Sub Out jack of the P 7.
Note:
When the P 7’s Bypass mode is selected, its
Note: When the P 7’s Bypass mode is selected, its Note:
volume level is fi xed
and the balance, trims and
tone controls are all disabled; these adjustments should be made on the digital surround receiver.