Filter
Top Products
EVT-**% or
EVT-FULL
CPY-**% or
CPY-FULL
CAM cc ERR
LINK_ERR_0p
HDD-5ERR
EVENT-HDD FULL
HDD-6ERR
COPY-HDD FULL
NET-3-0ERR
CAMERA cc ERROR
NET-1-p ERR
NW LINK ERROR
The HDD is almost full or
completely full.
Communication with the
network camera is unstable,
or no network camera is
connected.
Network between this unit
and the network camera is
disconnected.
Initialize or replace the HDD. (*1)
Press the ALARM RESET button to cancel
the error status. Check the communication
status between this unit and the network
camera.
Check the network connection.
*1: The HDD should be replaced by the qualified service personnel or system installers. Contact the dealer to
replace the HDD.
Contact the dealer when an unlisted error occurred.
Contact the dealer.
After replacing the faulty disk, the error sta-
tus will be canceled. (*1)
SMART u-d HDD-1-u-d ERR
HDD WARNING
The HDD may be malfunc-
tioning and may work incor-
rectly.
Contact the dealer to replace the HDD. (*1)
H.METER u-d HDD-2-u-d ERR
HDD HOUR METER
The set time for the hour
meter has passed.
It may be reaching the end
of the HDD’s lifetime.
Press the ALARM RESET button to cancel
the error status. If this error occurs frequent-
ly, contact the dealer to replace the HDD.
(*1)
V-ERROR vvv
REMOVE u-d HDD-3-u-d ERR
HDD REMOVED
Data on each recording
area is lost by the
"REMOVE" error, etc.
An error has occurred on
the HDD and the HDD has
been unmounted from the
system automatically.
Contact the dealer.
After replacing the faulty disk, the error sta-
tus will be canceled. (*1)
W-ERR u-d Failed to write/read data on
the HDD.
The HDD may be malfunc-
tioning.
Press the ALARM RESET button to cancel
the error status. If this error occurs frequent-
ly, contact the dealer to replace the HDD.
(*1)
R-ERR u-d
HDu-d 1DOWN HDD-10 ERR
RAID5 1DOWN
A HDD of RAID is failed. Contact the dealer.
After recovering/replacing the faulty disk, the
error status will be canceled.
HDu 2DOWN
Please Setup on
DISK CONFIG
MENU
Disk array is changed. Display the DISK CONFIG MENU and con-
figure the HDD settings.
52
When the Error Log is Displayed
Do the following when the error log is displayed on the LCD.
Error Log Indication on the
LCD
Description Solution