Filter
Top Products
5
3. Specify the start time with the JogDial, LCD button, ↑ and ↓ button.
• To increase or decrease the parameter, rotate the JogDial clockwise or counter-clockwise. Pressing the LCD button
upward or downward will perform the same operation.
• To move the cursor to the right or left, press the LCD button to the right or left. Pressing the ↑ or ↓ button will perform the
same operation.
4. Specify the end time as same as the start time.
5. Press the JogDial for 2 seconds to start copying. The LCD dis-
plays status.
Notes:
• There may be cases that a few pictures are copied redundant than specified.
• When an exact starting time is not found among the recorded data, copying will start from the closest time to the specified.
• Time and date specific copy may error when the original data are lined back and forth on the WJ-HD100.
• Time relation should be always kept so that the end time comes after the start time.
Additions to page 40, Copy to CompactFlash Card
● Notes on alarm operation during copying
• The recorder stops copying and enters alarm recording when an alarm is activated in the course of copying. We recom-
mend that you set ALARM SUSPEND to ON with the LCD buttons (refer to page 38) when copying is frequently interrupted.
• Even though ALARM SUSPEND is set to OFF there may be cases where the recorder ignores alarm inputs without logging
events while copying.
START JAN01.01 23:00:00
END JAN02.01 23:10:00
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST