Filter
Top Products
ADDENDUM
The following changes and additions have been applied to the WJ-HD100 Operating Instructions.
SYSTEM INFORMATION
HDD HOUR METER 1000H
HDD CAPACITY . GB
DEFAULT
→
SET
→
VER x.xx(x.xx x.xx x.xx)
● Folders & Files on page 40: Descriptions
are replaced with the following.
In each COPY TO CARD operation, a folder with a 6-digit
name is created on the card, for example, 000001, 000002
and so forth. A folder contains files having the [.jpg] or
[.htm] extension as shown below.
Changes
● System Info window on Page 17 & 31:
VERSION display has been changed.
HD100
000001.jpg
000001
000002
000002.jpg
000003.jpg
Blue.jpg
Viewer.htm
ENGLISH VERSION
● Communication Protocol, Setup Control on page 48 has been corrected.
Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII)
Cursor Moves DCR:n1n2 DCR n1=A Right
n1=C Upward
n1=E Left
n1=G Downward
n2=1 Move a step
n2=2 Move multi steps
n1n2=+1 Select parameter(+)
n1n2=-1 Select parameter(–)
n1n2=PD Move to lower layer
n1n2=P+ Move to upper layer (deletion)
n1n2=P- Turn a newer page (deletion)
n1n2=PU Turn an older page (deletion)
n1n2=PU Move to upper layer (addition)
Setup MSU:n MSU (deletion) n=0 End setup
MSU:n (addition) n=1 Begin setup
Default setting Changes
● REC SETUP windows on page 17, 24, 25 and 26:
The default setting for DISK END MODE is changed from [STOP] to [CONTINUE].
The fourth line of text on page 26 is also changed from STOP to CONTINUE well.