Filter
Top Products
Operating Instructions
TU-HDT206A
26
Mains input voltage AC 220 to 240 V
Mains input frequency 50 / 60 Hz
Power requirements
Power consumption
Normal operation: 14 W maximum
Temperature
0° to 40°C
Environmental Condition
Relative Humidity 20 % to 80 % (Without condensation)
Dimension 365 mm x 245 mm x 60 mm Dimension
Weight 2.45 kg
Remote Controller
Battery
AA 1.5 V x 2
User’s manual Operating Instructions
A/V Cable
1.5 m, R/G/B for component video
1.5 m, R/W for stereo audio
Accessory
RF Cable 1.5 m, 3C2V, IEC Male/Female
EMC / Safety
Standard
AS/NZS CISPR 13:2003 Class B
AS/NZS 60065: 2003
Note
Design and specifications are subject to change without notice.
Caring for your Digital Receiver
• Remove the mains plug from the wall socket. The cabinet can be cleaned with a dry clean
cloth. Do not use solutions containing benzol or petroleum.
• Make sure that all the electrical connections are properly made. Do not connect any of
your equipment (TV, video recorder, etc.) to the mains supply until you have properly
connected all the other leads. Disconnect your Digital Receiver from the mains supply
before you disconnect any other equipment from its rear panel.
Trademark Acknowledgment and license notice
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
Declaration of Conformity No. 4296, 22
nd
August 2006
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.