Filter
Top Products
Operating Instructions
TU-HDT206A
13
5.7 SD Onscreen Display
The video output from the SD terminals (VIDEO & S-VIDEO) have the OSD’s(on
screen displays) for viewer information when the SD output is connected to a display.
However when the SD video output is connected to a VCR or DVD recorder, the
OSD’s are automatically removed from the SD video output by the connection of HD
video connectors to the digital receiver.
Audio levels can only be changed by the digital receiver volume control on the RCA
audio outputs that are associated with the OSD. The audio output to a VCR or DVD
recorder is always set at maximum audio level.
6 Using the Main Menu
Your receiver comes with a directory of features or the Main Menu. The Main Menu is
your gateway to customising many of the features offered by your receiver. To
navigate through the menu items, use the coloured keys, cursor up/down, cursor
left/right and OK buttons on the remote control. The buttons that can be used to
select options are displayed at the bottom of the screen.
To access the Main Menu, press the MENU button.
The Main Menu feature comprises the following categories of services:
Favourites List provides access to:
Favourites List 1, 2, & 3 set up
Video Menu provides access to:
HD Video Output Format
HDMI Format
Teletext Contrast
Display Time Out
SD Picture Format
Audio Menu provides access to:
Volume Control
Audio Delay Time
MPEG Audio Level
Audio Mode Priority
Digital Audio
Power Saving Setup provides access to:
Automatic Off Timer
Tuning Menu provides access to:
Signal Display
Channel Installation
Region Select
Restore Default Settings
System Update
Diagnostic Information displays the Software Version number and serial ID of your
receiver.