Panasonic SC-VKX25 Speaker System User Manual


 
21
RQT9952
1
The original language designated on the disc is
selected.
2
Input the applicable code from the “Language code
list” (
Z
23).
3
If the language selection for “AUDIO” is not available
for the disc played, the subtitles in that language will
be shown (if available on the disc).
“VIDEO” menu
TV ASPECT
Change the setting to suit your TV and preference.
16:9: Widescreen TV (16:9)
4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture
are cut off so it fills the screen (unless
prohibited by the disc).
4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the
letterbox style.
TIME DELAY
When connected with an AV amplifier and Plasma TV,
adjust if the audio is out of sync with the video.
0 ms
20 ms
40 ms
60 ms 80 ms 100 ms
NTSC DISC OUT
Change PAL 60 or NTSC output when you play NTSC
discs.
NTSC:
Output signals from NTSC discs remains as
NTSC.
PAL60: NTSC discs can be viewed on PAL TV.
For the Middle East and South Africa
“PAL60” is the factory preset.
STILL MODE
Specify the type of picture shown when in pause
mode.
AUTO
FIELD:
The picture is not blurred, but the picture
quality is lowered.
FRAME:
Overall quality is high, but the picture is
blurred.
“AUDIO” menu
DOLBY DIGITAL
BITSTREAM
PCM
DTS
BITSTREAM
PCM
For the Middle East and South Africa
MPEG
BITSTREAM
PCM
Select “BITSTREAM” when the equipment can
decode the bitstream (digital form of multi-channel
data). If not, select “PCM”. (If the bitstream output to
the equipment without a decoder, there can be high
levels of noise output that can do damage to your
speakers and hearing.)
DYNAMIC RANGE
ON: Adjust for clarity even when the volume is low.
The range between the lowest and the highest
sound levels is compressed. Convenient for late
night viewing. (Only works with Dolby Digital.)
OFF
“DISPLAY” menu
LANGUAGE
Select the language for the on-screen messages.
ENGLISH FRANÇAIS ESPAÑOL
PУCCKИЙ
“OTHERS” menu
SLIDE SHOW TIME
To change the slideshow time.
1 SEC to 15 SEC (in 1-unit)
15 SEC to 60 SEC (in 5-unit)
60 SEC to 180 SEC (in 30-unit)
“3 SEC” is the factory preset.
EASY SETUP
SET: Shows the EASY SETUP settings.
DVD-VR/DATA
Select to play only DVD-VR or DATA format.
DVD-VR: To play video on DVD-R/RW.
DATA: To play data files on DVD-R/RW.
SCREEN DIMMER
This is to prevent burnt mark on the TV screen.
OFF
WAIT 5 MIN: If there is no operation for 5 minutes, the
picture becomes grey. The TV screen
will go back to the normal position when
you do some operations. (This does not
apply during video playback.)
DEFAULTS
This returns all values in the SETUP menus to the
default settings.
RESET
The password screen is shown if “RATINGS”
(
Z
20, “RATINGS”) is set. Input the same password
and then press [OK], then switch off the system and
switch on again.
SC-VKX25GAGS_RQT9952-B_En.indd 21SC-VKX25GAGS_RQT9952-B_En.indd 21 8/18/2014 3:36:48 PM8/18/2014 3:36:48 PM
printing rev.1
Confidential
Until:
29 Aug 2014