Filter
Top Products
Getting started
RQT9670
11
Connect the speaker cables.
≥ Use the “Panasonic” logo to identify the left and right speakers, then connect the cables (as illustrated).
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw into the wall.
≥ Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at least 20 mm (
25
/32q) of space above and on each side of the speaker to allow enough space for fitting the
speaker.
≥ The position on the wall where the screw is to be attached, as well as the screw, should be capable of supporting over
33 kg (72.8 lbs).
≥ Keep the screws out of reach of children to prevent swallowing.
1 Insert the wire
fully.
r: White
s: Blue line
2 Press into the
groove.
A RED: Right speaker channel (R)
B WHITE: Left speaker channel (L)
C At least 30 mm (1
3
/16q)
D ‰4.0 mm (
5
/32q)
E ‰7.0 mm to ‰9.4 mm (
9
/32q to
3
/8q)
F Wall or pillar
G 5.5 mm to 6.5 mm (
7
/32q to
1
/4q)
H 326 mm (12
27
/32q) I 316 mm (12
7
/16q) J 316 mm (12
7
/16q) K 26 mm (1
1
/16q)
L Wall mounting hole
White
Red
Push
Front view (semi-transparent image)
SC-HTB351_RQT9670_mst.book Page 11 Thursday, December 29, 2011 1:39 PM