Filter
Top Products
16
VQT4D53
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with
the speaker cable with a white connector on the observers’ left.
To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall or table with a fall
prevention cord (hereafter “cord”).
≥
Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not
have strong enough support (
>
11, 13). Improper attachment may result in damage to the wall and speakers, and personal injury.
≥ Use a cord of less than ‰1.5 mm (
1
/16q), which is capable of supporting over 10 kg (22.05 lbs).
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Make sure that the slack of the cord is minimal.
Speaker fall prevention measures
When placing the speakers on a wall
Horizontal placement
Vertical placement
A Cord (not supplied)
B Screw eye (not supplied)
C Wall
D TV
Press into the
groove.
Back of the speaker base
Pull the cable straight
along the line and slide
into the groove.
≥ Be sure to insert the cable
in under the projecting part.
A
C
C
A
B
Wall-mounted speakers (
>
11)
A
C
C
A
B
D
Wall-mounted speakers (
>
13)
SC-HTB20P~Body_mst.fm 16 ページ ２０１２年１月１８日 水曜日 午前１１時１分