Filter
Top Products
35
RQT7921
Set categories to make it easier to see what kind of programs are in
the list.
1 Press [1] (cursor) while the program
you want to categorize is highlighted.
2 Press [3421] to select a category
and press [MENU] to confirm and
return to the previous screen.
To return to the Jet Navigator list
Press [MENU].
[Note]
≥If you have already stored 14 programs on a tape and you then store
another one, the new item is added and the oldest is deleted.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA”
appears when you try to store more than fifty programs. The new
item is added and the oldest item is deleted.
≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DATA” appears
when you try to store items for more than 20 tapes. Delete all the Jet
Navigator data in the unit if you want to save the data for the tape
(l 38).
≥The list does not appear when playing tapes recorded on other
equipment.
≥Parts of the list data are recorded on the tape. Take care when
recording over older recordings that you do not overlap it. It is
recorded within a few minutes either side of the beginning of the
recording (longer if you used EP or VP).
To demonstrate the Jet navigator function
Keep [NAVI] pressed for more than 5 seconds without inserting a
cassette tape.
Use the index marks on a tape to find sections to play.
The unit adds index marks when recording starts. To add them
manually during recording, press [SHIFT]i[¥ REC].
While stopped or during play
Press [:] (backward) or [9] (forward)
to skip to the part you want to play.
≥Up to 20 index signals can be searched for in both directions.
≥You can reduce the number of skips by pressing the opposite button.
≥This feature may not work correctly if the marks are too close
together. Make recordings of at least 15 minutes (25 minutes in VP
mode).
To see these displays, set the OSD item in the OPTION menu to ON.
Press [STATUS/FUNCTIONS].
The time and operation details appear on the screen for about 5
seconds.
[Note]
≥These displays do not appear when paused or during slow play.
≥The on-screen display may be disturbed depending on the playback
tape or the input signal.
Setting categories
Category Indication Icon Category Indication Icon
MOVIE MOVIE SPORTS SPORT
MUSIC MUSIC CHILDREN CHILD
DRAMA DRAMA NEWS NEWS
EDUCATION EDUCA OTHERS OTHER
DOCUMEN-
TA RY
DOCUM
Finding programs—VHS Index Search
System (VISS)
[:][9]
Index mark
Program Program Program
twice twiceonce once
On-screen display
1 Channel display
Displays the cable television channel or television channel
currently being received.
2 STEREO/SAP indication
Indicates when a program is broadcast in stereo or SAP.
(l 39)
3 L and R indicators
The Left (L) and Right (R) indicators show which sound
mode is selected as follows:
Stereo: Both the L and R indicators appear.
L: The L indicator appears.
R: The R indicator appears.
Mono: Neither the L and R indicator appears.
4 Tape running display
Shows operations taking place.
5 Shows the time and tape counter
Press [STATUS/FUNCTIONS].
The display changes as follows:
Present time>Tape counter>Remaining tape time
^""""""""""""""""""b
Using index search: “S 01” to “S 20” is displayed.
Using jet rewind: “J.REW” is displayed (except when the
remaining tape time indication appears).
≥Press [SHIFT]i[RESET] to reset the tape counter
(elapsed time) to “0:00.00”.
≥The remaining time is approximate. It will be incorrect if
you set the wrong tape time in the TAPE SELECT item in
the OPTION menu and if the tape is of poor quality.
6 Cassette in indicator
Shows whether you have loaded a cassette.
7 Tape speed indicator
(l 30)
8 Picture mode indicator
(l 29)
STATUS/
FUNCTIONS
CH 1
STEREO
L R
0:00.22
1 SP 1
STANDARD
123 45
6
8
7
[Remember] Press [VHS] first.
RQT7921-P_ENG.book 35 ページ ２００５年２月４日 金曜日 午後４時５８分