Filter
Top Products
18
RQT7921
Convenient functions
You can select the disc after checking the discs loaded with the Disc
information screen.
≥You can also select the disc directly with 5 DISC SELECTOR
buttons on the main unit.
1 Press [DISC] to show the Disc
information screen.
2 Press the numbered buttons ([1] – [5]).
To clear the screen
Press [DISC].
≥You can not select a tray with no disc.
Press [QUICK OSD].
The current playback condition screen is displayed.
≥To exit the screen
Press [QUICK OSD].
≥[CD] [MP3] [WMA] Quick OSD screen will appear automatically.
≥If there is a JPEG data in the disc, Quick OSD screen will not appear
automatically.
[VCD]
[CD] [WMA] [MP3]
This feature is very convenient if you want to play several music CDs
sequentially. Make sure that applicable discs are on the tray before
playing. (l Disc information, left)
DVD and JPEG files are skipped without being played.
1 While stopped
Press [CD MODE].
2 Press [1] (play).
≥If all loaded discs are DVD, JPEG, or unchecked, CD Mode does not
work.
≥HighMAT
TM
menus and Video CD playback control are disabled.
≥You cannot change the mode during program play, random play or
CD mode play. (l 20)
≥If you want to play a DVD, press [CD MODE] again to cancel CD
Mode. (CD Mode is also canceled when you switch the unit to
standby.)
≥If no disc is loaded in the player, CD Mode will not function.
(Only when the elapsed play time can be displayed)
(Except iR/iRW)
Press [QUICK REPLAY] to skip back a few
seconds.
[RAM] [DVD-V] (Except iR/iRW)
Allows you to browse the disc contents and start playing from the
selected position. You can select either “Intro Mode” or “Interval Mode”
in “Advanced Disc Review” in the “Disc” tab (l 26).
1 Press [ADVANCE DISC REVIEW].
≥Quick OSD screen is displayed
2 Press [1] (play) when you find a title/
program to play.
≥This may not work depending on the disc and the play condition.
[RAM] [DVD-V]
(Except iR/iRW)
Play restarts from approximately a minute later. Convenient when you
want to skip commercials etc.
During play
Press [CM SKIP].
[RAM]
≥It is not possible to skip the program if the start of the next program is
within about one minute of the point you skipped from.
Disc information
Displaying current playback
condition (QUICK OSD)
VOLUME
123
4
5
6
78
0
DISC
9
CH
NAVI
CANCEL
SPEEDPROG
SKIP
SLOW/SEARCH
MENU
ENTER
DIRECT
NAVIGATOR
TOP MENU
RETURN
STATUS/
FUNCTIONS
TV
FM/AMDVD/VHS
DVD TV
VHS
TUNER
PICTURE MODE
SETUP
OPEN/CLOSE/EJECT
JET REW
ENTER
PLAY
LIST
TV VOL
TV VOL
MULTI RE-MASTER
QUICK OSD
MIX 2CH
ZOOM
PROGRESSIVE
CD MODE
REPEAT
PLAY MODE
H.BASS
SUBWOOFER LEVEL
C.FOCUS
SFC
TEST
SUPER SRND
CH SELECT
MUTING
CM SKIP
ADVANCE
DISC REVIEW
QUICK
REPLAY
REC
SLEEP
PL
AUDIO
RESET
TV/VIDEO
SHIFTSHIFT
INPUT SELECTOR
DVD
SHIFT
ZOOM
AUDIO
QUICK
REPLAY
CD MODE
REPEAT
ADVANCE
DISC REVIEW
QUICK OSD
CM SKIP
DISC
S10
Numbered
buttons [1] [5]
DISC
SETUP
Disc Information
CD
DVD-Audio
Unchecked
No Disc
DVD-Video
Track
10 Time 60:15
Not yet readEmpty
MULTI RE-MASTE
R
QUICK OSD
Chapter
Time
4
Title
1 0:41:23
Program Playback
e.g. [DVD-V]
Current playback number Elapsed play time
Playback
condition
Current positionPlay mode
CD Mode
(CD sequential play)
Quick replay
Reviewing title to play
(Advanced Disc Review)
Skipping one minute forward
(CM skip)
PROGRESSIVE
CD MODE
CD
QUICK REPLAY
SPEED
ADVANCE
DISC REVIEW
Program
Time
4 0:01:06
04
e.g. [RAM]
PROG
CM SKIP
RQT7921-P_ENG.book 18 ページ ２００５年２月４日 金曜日 午後４時５８分