Filter
Top Products
7
RQTX1267
2 Measure and mark the position of the wall
mount brackets (Both sides).
≥ Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
3 Attach the wall mount bracket to the wall with 2
screws F. (Both sides)
≥ Use a spirit level to ensure both wall mount brackets are level.
≥ Use a screw which is strong enough to support the weight of at least
33 kg.
4 Fix the safety holder D onto the unit with the
safety holder screw B.
≥ Before attaching, stick the rear pads (supplied) to A.
≥ Screw tightening torque: 80 N0cm to 120 N0cm.
5 Hang the unit on the wall.
Hook the unit securely onto the wall mount brackets.
≥ Connect the DAB antenna (
[HC55]
) or FM/AM antenna (
[HC35]
) and the AC
mains lead to the unit before hanging the unit onto the wall. (> 4)
≥ After hanging the unit, release your hand carefully to confirm the unit sits
securely on the wall.
6 Fix the safety holders E onto the wall mount
brackets with the safety holder screws C.
(Both sides)
≥ Screw tightening torque: 80 N0cm to 120 N0cm.
7 Drive the safety holder fixing screw G to
secure the safety holder D onto the wall.
≥ Refer to step 3 for requirements before screwing.
229 mm
12.5 mm
300 mm
480 mm
48.5 mm
229 mm
680 mm
133 mm118 mm
89 mm
139 mm
At least 30 mm
7.5 mm to 9.4 mm
4 mm
Wall mount bracket
Safety holder
screw B
Wall
Safety holder E
Safety holder
screw C
Safety holder fixing screw G
Safety holder D
Fixed to the wall
SC-HC55DB&35GN-RQTX1267-B.book 7 ページ ２０１１年２月１８日 金曜日 午後５時５８分