Filter
Top Products
10
RQTX1267
Disc operations
1 Press [Í] to turn the unit on.
2 Open the sliding door. (> 9)
3 With the label of the disc facing
towards you, tilt the disc into the
disc tray under the sliding door.
4 Place the disc onto the spindle
in the centre and then push the
disc down until it clicks into
place.
≥ Make sure that the unit does not fall when
inserting the disc.
5 Close the sliding door. (> 9)
∫ Removing a disc
1 Open the sliding door.
2 Hold the centre and the top right of the disc and pull the top
right of the disc to unlock it from the spindle.
3 Tilt the disc so as not to touch the sliding door or the lens and
remove the disc.
1 Press [Í] to turn the unit on.
2 Insert the disc to be played.
3 Press [CD].
4 Press [1/;] to start play.
After performing steps 1-3 in “Basic play”
1 Press [PLAY MENU] repeatedly to select
“REPEAT”.
2 Press [2, 1] to select “ON REPEAT” and press
[OK].
3 Press [1/;] to start play.
≥ To stop repeat play, select “OFF REPEAT” in step 2.
After performing steps 1-3 in “Basic play”
1 Press [PLAY MENU] repeatedly to select “PLAY
MODE”.
2 Press [2, 1] to select the following mode and
press [OK].
3 Press [1/;] to start play.
≥ During random play, you cannot skip to the previous track.
≥ The current play mode is cleared when you open the sliding door.
≥ To repeat program play or selected play mode, select “ON REPEAT” in PLAY
MENU.
Enables you to program up to 24 tracks.
After performing steps 1-3 in “Basic play”
1 Press [PROGRAM] during the stop mode.
3 Press [1/;] to start play.
≥ The program memory is cleared when you open the sliding door.
Inserting a disc
Basic play
Stop Press [∫].
Pause Press [1/;]. Press again to resume play.
Skip Press [:] or [9] to skip track.
Press [3, 4] to skip album. (MP3)
Search
[CD ]
Press and hold [6] or [5].
Direct access
play
(Play starts from
the track you
selected.)
[CD]
: Press the numeric buttons to select
the track.
[MP3]
:
1 Press [3, 4] to select the album.
2 Press [9] once and then the
numeric buttons to select the track.
≥ This function does not work during random play
or program play.
View contents
information
Press [DISPLAY] repeatedly during play
or pause.
The current track’s information, etc. is
displayed.
≥ Maximum number of displayable characters:
approximately 30
≥ This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags.
Text data that is not supported will not be
displayed or shown differently.
Repeat play
Play mode function
1-TRACK 1TR: Plays one selected track on the disc.
1-ALBUM 1ALBUM:
[M P3 ]
Plays one selected album on the disc.
≥ Press [3, 4] to select the album.
RANDOM RND: Plays a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND:
[M P3 ]
Plays all tracks in one selected album
randomly.
≥ Press [3, 4] to select the album.
Program play
2
[CD]
:
Press the numeric buttons to select the track.
≥ To program more tracks, continue by pressing the
numeric buttons.
[MP 3]
:
1 Press [3, 4] to select the album.
2 Press [9] once and then the numeric buttons to
select the track.
3 Press [OK].
To program more tracks, repeat steps 1 - 3.
Cancel programme
mode
Press [PROGRAM] in the stop mode to
clear “PGM” indicator from the display.
Check programme
contents
Press [:] or [9] when “PGM” is
displayed in the stop mode.
Delete last
programmed track
Press [DEL] in the stop mode.
Clear all
programmed
tracks
1 Press [∫] in the stop mode.
2 Press [∫] again while blinking
“CLR ALL”.
SC-HC55DB&35GN-RQTX1267-B.book 10 ページ ２０１１年２月１８日 金曜日 午後５時５８分