Panasonic SC-BTT 195 Speaker System User Manual


 
38
VQT3X51
Speaker installation
option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
You can attach all of the speakers (except
subwoofer) to a wall.
The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 kg (22 lbs) per screw.
1 Drive a screw (not supplied) into the wall.
A
At least 30 mm (1
3
/
16
q
)
B 4.0 mm (
5
/32q)
C 7.0 mm to 9.4 mm (
9
/32q to
3
/8q)
D Wall or pillar
E 5.5mm to 7.5mm (
7
/32q to
5
/16q)
2 Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below to identify
the screwing positions on the wall.
Leave at least 20 mm (
25
/32q) of space above the
speaker and 10 mm (
13
/32q) on each side to
allow enough space for fitting the speaker.
[BTT196] [BTT195]
Front speaker
Attach to a wall without the base and the stand.
A 51 mm (2q)
B 64 mm (2
17
/30q)
C 350 mm (13
25
/32q)
[BTT190]
Front speaker, Surround speaker
[BTT196] [BTT195]
Surround speaker
D 40 mm (1
9
/16q)
E 24 mm (
15
/16q)
Center speaker
F 18 mm (
23
/32q)
G 25 mm (
31
/32q)
H 230.5 mm (9
1
/16q)
Attaching to a wall
e.g., [BT T 196] Front speaker
DO NOT DO
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker
so that the screw is
in this position.
SC-BTT190P_eng.book 38 ページ 2012年2月20日 月曜日 午後5時5分