Filter
Top Products
Enjoying TV with unit's
speakers
Preparation
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this
unit. (_ 23)
You can enhance stereo sources with surround sound effect.
2
Press [SURROUND] several times to select
the effect.
While "MANUAL" is displayed on the unit's display
Press [<1, 1_] and select the desired effect.
Surround modes to enjoy TV audio or stereo
sources from all speakers:
• DOLBY PL II MOVIE
• DOLBY PL II MUSIC
• S.SURROUND
• Cinema Surround (_ 19)
For more detailed information on this operation, please refer to
the "Enjoying surround sound effects" section on page 24.
Select to suit the type of audio from the DIGITAL AUDIO IN
terminals on the main unit.
Press [EXT-IN] several times to select "D-IN 1"
(DIGITAL IN 1) or "D-IN 2" (DIGITAL IN 2).
• DIGITAL IN l/DIGITAL IN 2
Press [AUDIO].
MAIN
SAP*
M+S* (stereo audio)
* "SAP" = Secondary Audio Program
(Only works with Dolby Dual Mono)
• "MAIN" or "SAP" is not available if "On" is selected in "Digital
Audio Input". (_ 36)
• DIGITAL IN 2
Press [STATUS].
CABLE/SAT AUDIO :
Select when an HDMI connected STB is selected on the
TV, "D-IN 2" input is automatically selected.(_ 31, "Setting
the audio link with the STB").
• Audiothatisinputthroughthe DIGITALAUDIOINorAUXterminalsarenot
outputfromthe HDMIAVOUT terminal.
You can adjust the mode depending on the source or situation.
1
2
Press [SOUND] several times to select the
mode.
While the selected mode is displayed on the unit's
display
Press [_1, 1_] and select the desired setting.
For more detailed information on this operation, please refer to
the "Changing the sound modes" section on page 24.
VQT2M 13