Filter
Top Products
Use of the speaker cable stickers is
convenient when making cable connections.
e.g. Front speaker (L)
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
e.g. Surround speaker
O Speaker cable sticker (included)
O Connector
(_ FRONT (L) WHITE
@ FRONT (R) RED
(_) SURROUND (L) BLUE
@ SURROUND (R) GRAY
_) CENTER GREEN
(_) SUBWOOFER PURPLE
Be sure to match the number on each sticker with the
connector color.
4-: White
- + - Blue line
• Be careful notto cross (short-circuit) or reversethe polarity of the
speaker wires as doing so maydamage the speakers.
• Don't use a front speakeras asurroundspeakeror viceversa. Verify
the type of speaker with thelabel on the rear of the speaker before
connecting the appropriate cable.
• Toavoidinjurybyfattingordroppingthe speaker,placethe speakercabtes
withcare not tostumbteor hook.
• Donot hotdthe speakerinone handto avoidinjuryby droppingthe
speakerwhencarrying.
Thread the speaker cable
through the base.
Attach the speaker.
Leave about 120 mm (4 23/32")
Insert the wire fully.
White
Push!
You can remove and use the cable
from the stand. To reattach the
cable, refer to page 40.
Press into the groove.
@ Tighten securely.
Slide into the
groove.
l_r_l i'_l
• Preventing the speakers from falling
• Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
e.g., IrCr_'_,l O String (not included)
Thread from the wall to the speaker and tie tightly.
O Rear of the speaker
• Screw eye (not included)
(_ Wall
O Approx.150 mm (5 2%2")
VQT2M 13