Filter
Top Products
Listening to the Radio
Up to 30 stations can be set.
1 Press [RADIO] to select "FM".
2 Press [STATUS] to select the position to
start the auto preset search,
LOWEST:
To begin auto preset with the lowest frequency (FM87.9 or
FM87.5).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to "Presetting stations
manually".
3 Press and hold [OK].
Release the button when "AUTO" is displayed.
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
• "SET OK" is displayed when the stations are set, and the radio tunes to the
tast preset station.
• "ERROR" is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
1
2
Press [RADIO] to select "FM".
Press the numbered buttons to select the
channel,
To select a 1-digit number
e.g., 1: [1] => [OK].
To select a 2-digit number
e.g., 12: [1] =>[2].
Alternatively, press [A, v] or [<, I_].
• Display on the main unit
TUNED/STEREO: Displayed when receiving stereo
broadcasting
TUNED: Displayed when receiving monaural
broadcasting or monaural sound is
selected.
Preparation
Select a radio broadcast.
(_ Press [RADIO] to select"FM".
@ Press [SEARCH<<] or [SEARCHIH_] to select the
frequency.
• Tostart automatictuning,pressandhold[SEARCH_I<],[SEARCHI_I_]
untilthe frequencystartsscrolling.Tuningstopswhena stationisfound.
1 While listening to the radio broadcast
Press [OK].
2 While "P" is flashing on the display
Press the numbered buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1] =>[OK].
To select a 2-digit number
e.g., 12: [1] => [2]
• A stationpreviouslystoredis overwrittenwhen anotherstationis storedin
the samechannelpreset.
• FM frequency step
Main unit:
The factory setting is set to 0.2 MHz, it can be changed to
receive broadcasts allocated in 0.1 MHz. You may need to
change this setting if the tuner seems to skip over the correct
frequency for stations in your area.
(_) Press [SELECTOR] to select"FM".
@ Press and hold [SELECTOR].
After a few seconds the display changes to show the
current lowest frequency. Continue to hold the button
down. The lowest frequency changes and the step is
changed.
To return to the original settings, repeat steps (_ and @.
• Afterchangingthesetting,previouslypresetfrequencieswittbecleared.
Presetthemagain.
VQT2M 13