Filter
Top Products
The supplied stands are specially designed for
Assembling the front speakers attachment to Panasonic SB-FS740 or SB-FS940
front speakers. Use only as indicated in this setup.
Preparation
• To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
• For assembly, use a Phillips-head screwdriver.
• Make sure you have all the indicated components before starting assembly, setup, and connection.
• There is no difference between the right and left speakers and stands.
• For optional wall mount, refer to page 6.
!!!!!!!!!i
Attach the stand to the base.
Thread the speaker cable through the base,
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then pull
the rest of the sable through the base.
Cable
(_ Attach the stand to the base while gently pulling on the
end of the speaker cable,
3
Attach the speaker to the stand,
Q Pull out the end of Ridges
the speaker cable
and position it
between the ridges.
Stand
Attach the speaker to the stand.
Cover plate
Speaker Remove before attaching
the speaker and keep for
wall-mount use (4 page 6).
Stand
Stand
4" Secure the speaker to the stand,
Base
Pull gently.
Speaker
Stand
Screw
Tighten securely.
Ensure the speaker cable is
centered in the groove.
2
Secure the stand to the base.
Screw
Tighten securely,
Stand
Base
Screws
Tighten securely,
Slide the speaker
cable into the groove.
Connect the speaker cable.
+ :White
; Blue
Insert the wire fulh
Push!
into the groove,