19
Operations
RQT7523
For your reference
• When playing video sources connected to DVR/VCR1
The picture remains on the screen even if you select TAPE, CD or
TUNER.
• When SPEAKERS B is on
If SPEAKERS B is selected, play will be 2-channel only. For multi-
channel play, press [B] to turn off “B”. Then press [A] so that “A” only
comes on.
• When input is DIGITAL
The tape monitor cannot be used.
• When muting is on
Muting is canceled when the unit is turned off.
• When DVD ANALOG 6CH input is on
Speaker settings are ineffective. Change the settings on the DVD player
if necessary.
No picture will be output when a TV and this unit are connected using a
HDMI cable. Connect the TV, equipment to be used for playback and
this unit with a video cable as shown on page 4 or page 9.
• When using a graphic equalizer
Some distortion may occur, depending on the equalizer’s settings.
Buttons not explained on this page are used only to operate other equipment.
Refer to the separate booklet, “Remote Control Operation Guide”, for remote control operation details.
Remote control
[^, RECEIVER]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and channels.
[DISC, DIRECT TUNING]
To enable selection of radio stations by
frequency.
[ ≧ 10, ENTER]
To enter two digit channels.
[TUNER/BAND]
To change the input mode and remote
control mode to TUNER.
For switching between FM and AM.
[e, r, w, q, ENTER,
RETURN TV VOL 4]
To operate the on screen menus.
[HELP]
Displays help messages.
Press if an error message appears.
A message offering a possible solution
scrolls across the display.
• The remote control mode button currently
selected lights when you press this.
[SUBWOOFER]
For selecting subwoofer level.
[CENTER FOCUS]
For turning on the center focus mode.
[MULTI REAR]
For turning on the multi rear surround mode.
[STEREO/2CH MIX, OFF]
For selecting STEREO or 2CH MIX mode.
To cancel surround effect.
[%PL Ⅱx]
Select MOVIE (DOLBY EX), MUSIC or
GAME when Dolby Pro Logic Ⅱx mode or
Dolby Pro Logic Ⅱ mode is on.
[DTS NEO:6]
For selecting a DTS NEO:6 mode: CINEMA
or MUSIC.
[SFC]
For selecting a SFC mode:
MUSIC or AV/MOVIE.
[DVD
–
ANALOG 6CH, TV, CD,
TAPE
–
MONITOR, DVD RECORDER, VCR]
Input mode and remote control mode
buttons.
These buttons light when you press other
buttons to indicate the current remote control
mode.
DVD –ANALOG 6CH
When DVD mode is selected
• Press and hold:
For switching between analog 6-channel
and 2-channel DVD input.
DVD ANALOG 6CH only works when either
SPEAKERS A or BI-WIRE is on and
SPEAKERS B is off.
TAPE –MONITOR
• Press and hold:
For monitoring sound when recording to a
3 head cassette deck. Also used when you
have connected a graphic equalizer to the
TAPE terminals.
[1, CH, 2]
For selecting preset radio channels.
[4,3, VOLUME]
To adjust the volume.
[MUTING]
To mute the volume.
[HQ SOUND MODE]
For turning on the HQ sound mode.
[-TEST –SETUP]
To start the speaker test signal or enter the
on screen menu.
[LEVEL]
To adjust speaker level.
[EFFECT]
To adjust Dolby Pro Logic Ⅱx, Dolby Pro
Logic Ⅱ, DTS NEO:6 or SFC effects.
[w, 3, q, 4]
First select EFFECT, LEVEL or SFC, and
then press [w, 3] or [q, 4] to complete the
setting.
1
u
/
ty
/
i
^ ^
2 3
4 5 6
7 8 9
DISC
0
10
RECEIVER
AV SYSTEM
TV
CD
TAPE
-
MONITOR
DVD RECORDER
VCR
>
=
CH
VOLUME
ENTER
DIRECT TUNING
TUNER/BAND MUTING
hqg
HELP
HQ SOUND
MODE
TV/VIDEO
DVD RECORDER
DVD/HDD
SUBWOOFER
-
TEST
-
SETUP
+–
CENTER
FOCUS
MULTI
REAR
LEVEL
EFFECT
SFC
STEREO/
2CH MIX
PL x
DTS
NEO:6
q
r
w
TOP MENU
MENU
DIRECT
NAVIGATOR
PLAY
LIST
DISPLAY RETURN
TV VOL
–
TV VOL
+
ENTER
e
DVD
-
ANALOG 6CH
qw
OFF