Filter
Top Products
18
RQT7514
Operations
Other functions
Making a recording
Dimmer
1. Enter the setup
mode.
Press and hold at the
same time
2. Select. 3. Select “ON”. 4. Exit the setup
mode.
Press and hold at the
same time
Dim the display for better viewing in a
darkened room.
The factory setting is OFF.
Sleep timer
Within 5 seconds To check the setting
Press [SLEEP] once.
• The time remaining apears.
To change a setting
Repeat the procedure from the beginning.
The sleep timer can turn the unit off after a
set time.
It does not control any other components.
The RESET function
While the unit is on.
Press and hold
“RESET” appears on the display.
The operation settings for the unit will be
initialized to the settings made at the time of
shipment.
However, any preset radio stations will not be
erased.
Select the source to be recorded.
You can record to a DVD recorder/VCR connected to DVR/VCR OUT.
See the recording unit’s operating instructions for details on how to
prepare it for recording.
Note
When recording with a DVD recorder/VCR, you can record any source
except DVR/VCR.
You cannot record a source connected through a digital terminal.
When recording from a TV, DVD or CD ensure the source is connected
through the corresponding analogue terminals and “ANALOG” input is
selected.
Begin recording.
Follow your recording unit’s operating instructions.
Start the source to be recorded.
Follow your equipment’s operating instructions.
SPEAKERS
PHONES
INPUT SELECTOR
VOLUME
DOWN UP
HELP
RESET
-
-
SPEAKERS
HELP
RESET
-
-
INPUT SELECTOR
TV/AV
+/R–/L
SLEEP
LEVEL
EFFECT
SFC
%
PL
DIMMER
TEST
r
w
TOP MENU
MENU
DIRECT
NAVIGATOR
PLAY
LIST
DISPLAY RETURN
TV VOL
–
TV VOL
+
ENTER
q
e
HELP
DVD RECORDER
DVD/HDD
SUBWOOFER
TONE/
BALANCE
MUTING
STEREO/
2CH MIX
qw
OFF
DIMMER
SLEEP
+/R–/L
qw
SPEAKERS
HELP
RESET
-
-
SETUP
DIMMER
SPEAKERS
HELP
RESET
-
-
DIMMER
INPUT SELECTOR
OFF
OFF
ON
SPEAKERS
HELP
RESET
-
-
COMPLETE
SLEEP
SLEEP 30
SLEEP OFF
+/R–/L
qw
SLEEP 30
30, 60, 90, 120 (in minutes)
HELP
RESET
-
-
RESET
SPEAKERS
PHONES
INPUT SELECTOR
VOLUME
DOWN UP
HELP
RESET
-
-
INPUT SELECTOR
1
INPUT SELECTOR
2
3
On the main unit
On the remote control
• To cancel, select “OFF”.
• To cancel, select “OFF”.