Filter
Top Products
17
RQT7514
Operations
Audio settings
A/D attenuator
1. Enter the setup
mode.
Press and hold at the
same time
2. Select. 3. Select. 4. Exit the setup
mode.
Press and hold at the
same time
Turn the A/D attenuator on if “OVERFLOW”
lights frequently when using 2-channel
analogue input.
The factory setting is OFF.
Dynamic range compression
Change this setting to listen to software
recorded with Dolby Digital at low volume
(such as late at night) maintaining audio
clarity. It reduces the peak level in loud
scenes without affecting the sound field.
OFF:
The software is played with the original
dynamic range (factory setting).
STANDARD:
The level recommended by the producer of
the software for household viewing.
MAX:
The maximum allowable compression
(recommended for night viewing).
1. Enter the setup
mode.
Press and hold at the
same time
2. Select. 3. Select. 4. Exit the setup
mode.
Press and hold at the
same time
Dual program
1. Enter the setup
mode.
Press and hold at the
same time
2. Select. 3. Select. 4. Exit the setup
mode.
Press and hold at the
same time
When the input signal is Dolby Digital and
“DUAL” appears in the display, the audio to
be output is set.
MAIN: Main audio output
SAP: Sub channel audio output
MAIN+SAP:Main and sub channel audio
output
The factory setting is MAIN.
DTS FIX mode
While the input source is selected
Press and hold at the same time for
2 seconds.
• To cancel, perform the same operation again.
“AUTO” is displayed.
In rare cases, the unit may have trouble
recognizing the digital signals on discs.
With DTS, the signals may not be recognized
at all. Engage the DTS FIX mode if this
occurs.
When DTS FIX mode is on, the unit cannot
process other signals. This may cause noise
to be output. Turn the setting off in this case.
• When you turn the unit to standby, the DTS
FIX mode is canceled.
SPEAKERS
PHONES
INPUT SELECTOR
VOLUME
DOWN UP
HELP
RESET
-
-
SPEAKERS
HELP
RESET
-
-
BAND
FM MODE
-
-
BAND
TUNE
1
INPUT SELECTOR
For continental
Europe and
the United Kingdom
For other areas
SPEAKERS
HELP
RESET
-
-
SETUP
SPEAKERS
HELP
RESET
-
-
A
/
D ATT
INPUT SELECTOR
OFF
OFF
ON
SPEAKERS
HELP
RESET
-
-
COMPLETE
SPEAKERS
HELP
RESET
-
-
SETUP
SPEAKERS
HELP
RESET
-
-
DR COMP
INPUT SELECTOR
OFF
OFF, STANDARD, MAX
SPEAKERS
HELP
RESET
-
-
COMPLETE
SPEAKERS
HELP
RESET
-
-
SETUP
SPEAKERS
HELP
RESET
-
-
DUAL PRG
INPUT SELECTOR
MAIN
MAIN, SAP, MAIN
+
SAP
SPEAKERS
HELP
RESET
-
-
COMPLETE
BAND
FM MODE
-
-
TUNE
1
BAND
For continental
Europe and
the United Kingdom
For other areas
TUNE
1
DTS FIX