Filter
Top Products
11
RQT7514
Step 4
You can adjust the effect of MUSIC and PANORAMA with the center width and dimension controls.
Center Width Control – C-WDTH
This adjustment helps you realize a more natural sound image when
listening to music. Move sound out into the front speakers to improve
the overall front image, or add sound to the center speaker to fix the
center image.
You can choose a level between 0 (the center speaker is dominant) and
7 (center sound is spread out). The default level is 3.
Dimension Control – DIMEN
You can make up for differences in the output level of the front and surround
speakers. You can choose a level between –3 and +3 - Increase the level to
move sound to the front speakers, decrease to move it to the surround
speakers. The default is level 0.
You can adjust the sound field by adjusting the level of the speakers and effect. These adjustments can be made for each SFC mode.
To adjust the speaker level
C, RS and LS:
–10 dB to +10 dB
SW: – – – (off) MIN
1 – 19 MAX
To adjust SFC effect
SFC effect can be adjusted between EFFECT 1 (minimum) and
EFFECT 10 (maximum).
• The factory setting is EFFECT 5 for each mode.
• Speakers set as “NONE” or “NO” are skipped.
Notes on sound modes
Dolby Pro Logic Ⅱ and SFC modes remain in effect until you
change them.
• To cancel
Press [STEREO/2CH MIX, OFF].
The 2CH MIX mode remains in effect until you change input mode
or turn off the unit.
• To return to surround sound
Press [STEREO/2CH MIX, OFF].
When input is PCM with sampling frequencies of 192, 176.4
(COAXIAL1), 96, or 88.2 kHz:
• You cannot add surround effects with Dolby Pro Logic Ⅱ, or SFC.
When neither the center or surround speakers are selected in the
SPEAKERS settings:
• You cannot use Dolby Pro Logic Ⅱ or SFC.
TV/AV
+/R–/L
SLEEP
LEVEL
EFFECT
SFC
%
PL
DIMMER
TEST
r
w
TOP MENU
MENU
DIRECT
NAVIGATOR
PLAY
LIST
DISPLAY RETURN
TV VOL
–
TV VOL
+
ENTER
q
e
HELP
DVD RECORDER
DVD/HDD
SUBWOOFER
TONE/
BALANCE
MUTING
STEREO/
2CH MIX
qw
OFF
LEVEL
+/R–/L
qw
STEREO/
2CH MIX
OFF
EFFECT
%
PL
SFC
EFFECT
+/R–/L
Select “C-WDTH”. Adjust the effect.
EFFECT
+/R–/L
Select “DIMEN”. Adjust the effect.
LEVEL
+/R–/L
Select speaker channel. Adjust the level.
EFFECT
+/R–/L
Adjust the effect.
C RS LS SW