Panasonic SA-BTX70 Home Theater System User Manual


 
11
RQT9479
Broadband Network Connections
AC power supply cord connection
The following services can be used when this unit is connected to the Internet via a broadband connection.
Firmware can be updated (> 29)
You can enjoy the BD-Live (> 19)
You can enjoy the VIERA CAST (> 29)
Use shielded LAN cables when connecting to peripheral devices.
With installation where your broadband modem is connected directly to your PC, a router must be installed.
Use a router that supports 10BASE-T/100BASE-TX.
In case all available connection on your router is being used, a hub or switch can be installed to provide additional connections.
When operating the VIERA CAST, use high-speed Internet service no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps
for HD (High Definition) picture quality by your local broadband company.
–If using slow Internet connection, the video may not be displayed correctly.
After physically connecting this unit to your broadband connection, some configuration is required. (> 30)
Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Main unit
LAN
Shielded LAN cable
(not included)
Internet
Broadband router, etc.
Telecommunications equipment
(modem, etc.)
NOTE
1
AC power supply cord
Main unit
1
AC power supply cord (included)
To a household AC outlet
(AC 120 V, 60 Hz)
Connect only after all other connections are complete.
Conserving power
The main unit consumes a small amount of AC power, even when it is turned off (approx. 0.2 W). To save power when the unit is not to
be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.
NOTE
TIPS
Getting started
BTX70PP_eng.book 11 ページ 2009年6月24日 水曜日 午後3時42分