Filter
Top Products
RQT8043
RQTV0286
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
17
1 Reduce the volume and connect the USB mass storage
device.
2 Press [6, USB] to start play.
To Action
Pause play
Press [6, USB].
Press again to resume play.
Stop play
Press [7, CLEAR].
The current track will be memorised.
Press [6, USB] to resume play.
OR
Press [7, CLEAR] again to clear the memory.
Skip tracks
Press [4, / REW] or [¢, / FF].
OR
Press the numeric buttons.
Skip album
Press [5/∞, ALBUM].
Compatible devices
Devices which are defi ned as USB mass storage class:
– USB devices that support bulk only transfer.
– USB devices that support USB 2.0 full speed.
Supported format
Files must have the extension “.mp3” or “.MP3”.
Note:
• Folders are defi ned as album.
• Files are defi ned as track.
• Track must have the extension “.mp3” or “.MP3”.
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not supported.
[Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is
supported]
• Depending on the sector size, some fi les may not work.
• Maximum album: 255 albums
• Maximum track: 2500 tracks
• Maximum track in one album: 999 tracks
• Only one memory card will be selected when connecting a
multiport USB card reader. Typically the fi rst memory card
inserted.
• Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
• When you connect a compatible digital audio player to the USB
port, charging may be activated. It will not charge when the unit is
in standby mode (during “DEMO OFF”).
Connecting and playing a Bluetooth deviceConnecting and playing a Bluetooth device
For the United Kingdom and Continental Europe
By connecting a Bluetooth Receiver (example: SH-FX570R, sold
separately), you can receive and play the audio stored in your
Bluetooth audio source device (personal computer, etc).
SH-FX570R
(not included)
Rear panel of
this main unit
1 Connect the Bluetooth Receiver into the OPTION port and
press [6, OPTION] to select “OPTION”.
2 Pairing and play your Bluetooth audio device. (See the
SH-FX570R’s instruction manual.)
3 Press [6, OPTION] to start play.
To Action
Pause
Press [6, OPTION].
Press [6, OPTION] to resume play.
Skip tracks
Press [4, / REW] or [¢, / FF].
Connecting and playing a USB mass storage Connecting and playing a USB mass storage
devicedevice
The USB connectivity enables you to connect and play MP3 tracks
from USB mass storage class. Typically, USB memory devices.
(Bulk only transfer)
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised by
this unit.
RQTV0286-1B.indd 17RQTV0286-1B.indd 17 5/5/08 3:54:22 PM5/5/08 3:54:22 PM