Filter
Top Products
RQT8043
RQTV0286
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
14
Setting the clock Setting the clock
This is a 24-hour clock.
1 Press [CLOCK / TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
2 (
Within 8 seconds or so
)
Press [4, / REW] or [¢, / FF] to set the time.
3 Press [CLOCK / TIMER] to fi nish setting the time.
Displaying the clock
Press [CLOCK / TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer Using the play or record timer
You can set the timer to come on at a certain time to wake you
up (play timer) or to record from the radio or the portable audio
equipment (record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to;
cassette, disc number (1 to 5), radio or other
equipments, and set the volume.
Record
timer
Check the cassette’s erasure prevention tabs
(
\ page 12), insert the cassette and tune to the
radio station (
\ page 13) or select the music port
source (
\ page 16).
1 Press [CLOCK/TIMER] to select the timer function.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
within 8 seconds
)
2 Press [4, / REW ] or [¢, / FF] to set the starting time.
Play timer indicator
Start time
Record timer indicator
3 Press [CLOCK / TIMER] to confi rm.
4 Repeat steps 2 to 3 to set the fi nishing time.
Finish time
Using the timers
To activate the timer
5 Press [ ˚PLAY/REC] repeatedly to turn on your desired
timer.
˚ PLAY
no display (off)
˚ REC
6 Press [y] to turn off the unit.
The unit must be off for the timers to operate.
Other basic operations
To Action
Change the
settings
Repeat steps 1 to 4 and 6 (
\ see left and
above).
Change the
source or
volume
1) Press [ ˚PLAY/REC] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 to 6 (
\ see above).
Check the
settings
Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
Cancel Press [ ˚PLAY/REC] to clear the timer
indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape or disc are loaded before
turning the unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
• If MUSIC PORT or OPTION port or USB is selected as the source
when the play timer comes on, the system turns on and engages
MUSIC PORT or OPTION port or USB as the source. If you wish
to record from the portable audio equipment, just activate the
portable audio equipment’s play mode and increase the volume.
(See the other equipments’ instruction manual.)
Using the sleep timerUsing the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [-SLEEP, –AUTO OFF] to select your desired time.
30 MIN 60 MIN
90 MIN 120 MIN OFF
Sleep timer indicator
To cancel
Press [-SLEEP, –AUTO OFF] to select “OFF”.
Changing the remaining time
Press [-SLEEP, –AUTO OFF] to show the remaining time and press
[-SLEEP, –AUTO OFF] again to select your desired time.
Note:
• The play and sleep timer or the record and sleep timer can be
used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
RQTV0286-1B.indd 14RQTV0286-1B.indd 14 5/5/08 3:54:16 PM5/5/08 3:54:16 PM