Filter
Top Products
RQT8043
RQTV0286
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
13
Using the FM/AM radio
Manual tuningManual tuning
1 Press [FM/AM] (main unit: [FM/AM/MUSIC P.]) to select
“FM” or “AM”.
2 Press [PLAY MODE] to select “MANUAL”.
3 Press [4, / REW] or [¢, / FF] to select the frequency
of the required station.
“
” is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4,
/ REW] or [¢, / FF] until the frequency
starts changing rapidly. The unit begins auto tuning, stopping when
it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4,
/ REW] or [¢, / FF] or
[7, CLEAR].
To improve the sound quality
When “FM” is selected
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO” disappears.
• MONO is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
When “AM” is selected
Press and hold [PLAY MODE].
Each time you press button: BP 1 BP 2
• The setting is recalled whenever “AM” is selected.
RDS broadcasting
For the United Kingdom and Continental Europe
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS”
will light up on the display.
Press [DISPLAY] to display:
Station name
(PS)
Program Type
(PTY)
Frequency
display
(FREQ)
Program type displays
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M-O-R- M
*
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
* M-O-R- M = Middle-of-the-Road music
Note:
RDS displays may not be available if reception is poor.
Memory presetMemory preset
30 FM and 15 AM stations can be preset.
Preparation
Press [FM/AM] (main unit: [FM/AM/MUSIC P.]) to select “FM” or
“AM”.
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
1 Press [PLAY MODE] to select “MANUAL”.
2 Press
[4, / REW] or [¢, / FF]
to tune to the required
station.
3 Press [PROGRAM].
4 Press the numeric buttons to select a channel.
For channels 10 to 30 press [
h
10], then the two digits.
The station occupying a channel is erased if another station is
preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1 Press [PLAY MODE] to select “PRESET”.
2 Press
[4, / REW] or [¢, / FF] to select the channel.
RQTV0286-1B.indd 13RQTV0286-1B.indd 13 5/5/08 3:54:15 PM5/5/08 3:54:15 PM