Panasonic PT-DZ21KU Home Theater System User Manual


 
[DISPLAY OPTION] menu
94 - ENGLISH
Settings
To set [BIT DEPTH]
4) Select [BIT DEPTH] in Step 3).
5) Press
󱚣󱚤
to switch [BIT DEPTH].
z
The setting will change as follows each time
you press the button.
[AUTO] [12-bit] [10-bit]
[AUTO]
Automatically select 12 bits or 10
bits.
[12-bit] Fix to 12 bits.
[10-bit] Fix to 10 bits.
To set [3G-SDI MAPPING]
4) Select [3G-SDI MAPPING] in Step 3).
5) Press
󱚣󱚤
to switch [3G-SDI
MAPPING].
z
The setting will change as follows each time
you press the button.
[AUTO] [LEVEL A] [LEVEL B]
[AUTO]
Automatically select level A or level
B.
[LEVEL A] Fix to level A.
[LEVEL B] Fix to level B.
Note
z
Does not operate during SD-SDI or HD-SDI input.
[ON-SCREEN DISPLAY]
Set the on-screen display.
1) Press

to select [ON-SCREEN
DISPLAY].
2) Press the <ENTER> button.
z
The [ON-SCREEN DISPLAY] screen is
displayed.
3) Press

to select an item, and press
󱚣󱚤
to change the setting.
[OSD POSITION]
Set the position of the menu screen (OSD).
z
The setting will change as follows each time you
press the button.
[2] (Center left of
the screen)
[3] (Bottom left of
the screen)
[1] (Top left of the
screen)
[4] (Top center of
the screen)
[5] (Center of the
screen)
[9] (Bottom right of
the screen)
[6] (Bottom center
of the screen)
[8] (Center right of
the screen)
[7] (Top right of the
screen)
[OSD DESIGN]
Set the color of the menu screen (OSD).
z
The setting will change as follows each time you
press the button.
[1]: Yellow [2]: Blue
[6]: Brown [3]: White
[5]: Pink [4]: Green
[OSD MEMORY]
Set hold for the position of the menu screen (OSD)
cursor.
z
The setting will change as follows each time you
press the button.
[ON] [OFF]
Note
z
Even if set to [ON], the cursor position will not
be held when the <MAIN POWER> switch of the
projector body is turned <OFF>.